Over the holiday I took some time to work on some of my GP35s. With the painting done and just some minor parts being installed, I figured I would begin weathering. I first started with doing a wash of 70% rubbing alcohol mixed with some black India Ink. Results were OK, but noticed some paint beginning to wash away. Then I realized that the clear coat I used was acrylic. So I fixed what I could and blended in the paint. Crisis averted! SO i decided to try out my Valljo black wash. Results were, but after it dried, I realized I went a little too heavy and it was really bad. SO I decided to take sum rubbing alcohol and try and fix what I did. It actually worked and with some patience and some fine tuning, I was able to salvage. So my wheels were turning and decided I would try and make a wash using oils and some Turpinoid. Well let me tell you, results were AWESOME. After everything dried I realized it was heavy in spots. SO i got out the turpinoid and worked on thinning out the heavy spots and blending. I was happy with the results.
The top 3 photos were pre-touch-up work.
A little more touching up.
Posed by the paper plant
Little dark.
This one turned out the best.
As for the photos, you can see in the last set that the track is starting to get put down. I am about 60%-70% done with putting track in place. Next up will be to glue it down in place. After the track is glued, I will be putting in the feeder wires and get all the wiring hooked up. Hopefully I will have some trains running by next week!
I also took some time to work on the paper plant and extended the walls a bit to match the other background building I installed. Once all that is in place, I will begin detailing.
I also scored an Atlas Gold Series MP15DC w/sound off eBay. It was a undecorated unit. I plan on working on putting it together and preparing it for paint. I noticed some of the extra spots for the number board and marker lights. I am going to tape those areas off to prevent any paint from getting on them. My plans for the marker lights are to paint them with some clear red paint. I was always a fan of marker lights and I wanted to keep some nostalgic symbols on the locomotive. I also have some Kato SD 40-2s that will need to be prepped for painting as well. I also have an old GP unit that will be getting a makeover. It was from my old freelanced layout. I plan on repainting and redoing that loco as well.
Lastly I also won a Atlas Master Series GP 38-2 on eBay as well. This too is an undecorated unit and will be painted up as well. LOTS OF WORK AHEAD!
Atlas Gold Series MP15DC
No comments:
Post a Comment